Vertical Communications TeleVantage 7.5 User Manual
Page 156
Running DCM remotely using Microsoft Terminal Services
This section describes how to remotely configure and start the Intel Dialogic system service via
Terminal Services on a TeleVantage Server running Windows 2000/2003.
Note:
Microsoft strongly recommends a clean installation of Windows 2000/2003 Server rather
than upgrading from Windows NT Server 4.0 Terminal Server Edition when you plan to use
Terminal Services in remote administration mode.
Configuring DCM for remote administration in a Windows
2000/2003 Terminal Server environment
Perform the following steps in order to run DCM remotely on a Windows 2000/2003 Server.
This procedure ensures that the Intel Dialogic drivers are recognized.
1.
From the Terminal Service client, connect and log in as administrator to the remote
TeleVantage Server.
2.
From the Start menu, select
Programs > Administrative Tools > Computer
Management
. In the left pane, expand
System Tools
and then click
Device Manager
.
3.
Choose
Show hidden devices
from the View menu.