Vertical Communications TeleVantage 7.5 User Manual
Page 178
I
NDEX
-4
connecting
ISDN PRI T1 trunk boards
connecting
ISDN PRI T1/E1
troubleshooting problems
ISDN trunks
configuring
ISDN Two B-Channel Transfer test utility
using
M
media load
changing for DM3 board
MSI/x analog station boards
connecting
R
reporting problems
Robbed Bit T1
signaling
troubleshooting problems
Robbed Bit T1 Experimenter
about
installing
placing and receiving calls
testing individual bit states
Robbed Bit T1 trunk boards
connecting
S
SIP phones
connecting
static warning
system
about
T
T1 trunks
configuring using Robbed Bit T1 Experimenter
using extended superframe service
telephony resources
providing
via Intel DIalogic boards
via Intel HMP
test-starting
DSIx drivers
Intel Dialogic drivers
Toshiba digital phones
connecting
Toshiba digital station boards
connecting
installing
troubleshooting
DM3 board problems
Intel Dialogic problems
ISDN lines
ISDN PRI T1/E1 problems
Robbed Bit T1 problems
specific problems
all phones ring when Dialogic drivers are started
analog trunks do not disconnect properly when
calls terminate
audio problems on conference calls on
MSI/x-GBL boards
DCM fails to detect a D/41ESC board
DCM fails to detect a DM3 board
DID numbers stop working after changes to a
Robbed Bit T1 line
DSIx board drivers do not start
echo heard on IP phone son calls that came in on
D/120JCT-LS analog trunk board
error Stations not responding on DISIx analog
station board
in the Device Monitor, stations or trunks are not
in the expected order
Intel Dialogic drivers do not start
Intel Dialogic drivers may not start after moving
or changing a Dialogic DM3 telephony board