Interlogix Simon XT Tabletop User Manual - Manual (Page 38)

32 Simon XT TableTop Control Panel User Manual
System tests
This menu lets you run sensor and communication tests, and initiate a phone call
from the panel to the Enterprise Downloader. For more information, see Chapter
5 Testing on page 35.
Revision
This menu item is a read- only display of the system’s firmware version. Press
Status to exit.
Contrast
To adjust the contrast of the display, do the following:
1. Scroll up/down to Contrast and press Enter.
2. Scroll up/down to increase and decrease the contrast setting. (There are
eleven contrast levels.)
3. Press Status to save the setting and exit.
Note: Changes in contrast are more noticeable when not looking at the display
straight on.
System programming
To enter system programming mode, do the following:
1. Enter the system menu.
2. Scroll up/down to System programming, then press Enter.
3. The panel displays Enter code. Enter your master code, then press Enter.
At this point, you are in the System programming submenu. At this level, the
following items are accessible:
• Access codes
• Security
• Phone #s
• Timers
• Siren options
• Light control
• System tests