Press display again to remove all the displays, O o o, O o o o – Philips DVP620VR/17 User Manual
Page 31: Vcr status displays 31, O © o, 1 o o, Helpful hints
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H9620UD_1_47,qx4 04.4.7
11:57 AM Page 31
VCR Status Displays 31
You may access status displays by pressing DISPLAY. The displays
may include the current time, channel, and other information.
^
Press DISPLAY. The COUNT display will appear for five
J
seconds. After five seconds, only the real-time tape counter
^ will appear.This counter shows you the elapsed playing
time of the tape (from the point at which the counter was
set to zero).The counter also will appear on the display
panel on the front of the DVD/VCR.
>
STOP
SLP
V
0:12:34
HIFI
J
Press DISPLAY again. The CLOCK display will appear
for five seconds. After five seconds, only the time will
appear (the clock must be set). (If you are watching TV, the
channel number and the availability of stereo or second
audio will also appear.) The time also will appear on the
display panel on the front of the DVD/VCR.
/■
\
STOP
5:40 PM
CH 02
STEREO
SAP
SLP
V
SEARCH MODE KSI^Y;
o o o
REPEAT REPEAT AUDIO
O © O
SUBTITLE ZOOM ANGLE SKIP/CH
O O O ©"
RETURN TITLE CLEAR/RESET SLOW
o o o o
^VCR^
^CR/T^
^DVD^
DISC/VCR ___________ SYSTEM
((MENUy“^
A
J------- ^MENUj)
C'^y—C^)—C^j
STOP
PLAY
PAUSE
®
®
®
TIMER SET
MARKER
RECORD
0 o ®
SPEED
1 O O © ©
® © © ©
© © © ©
PHILIPS
Press DISPLAY again to remove all the displays.
Helpful Hints
If the channel you select has no
broadcast, the screen will be solid
blue.
You cannot access a status dis
play when viewing a still picture,
during slow motion, or during for
ward and reverse searching.
Channel numbers appear on the
screen for a few seconds each
time you change channels.