Philips DVP620VR/17 - Manual (Page 37)

H9620UD_1_47,qx4 04.4.7 11:57 AM Page 37
Timer Recording (confd) 37
To enter the recording date, press ▲ or ▼ until the
month appears.Then, press
Next, press ▲ or ▼ until the day appears.Then,
press ►. The day of the week will appear. You cannot
record more than one year in advance.
ONETIME PROGRAM
PROGRAM NUMRpls t
DATE
0 S:f'0 +'iTUE
START TIME
END TIME -------------------
CHANNEL --
REG SPEED - -
To enter the recording’s start time, press a . or ▼ until
the hour appears. Press
Press ▲ or ▼ until the minute appears. Press
Finally, press
a . or ▼ to point to AM or PM. AM or
PM will flash beside the start time. Press ►.
ONETIME PROGRAM
PROGRAM NUMBER 1
DATE
START TIME
END TIME
CHANNEL
REG SPEED
0 5/0 1\TUE,„
0 7:3 Q-J MiC
AM
► PM
Repeat the procedure in step 6 to set the record­
ing’s end time.
Press ▲ or ▼ until the channel number appears.
Then, press ►.
• If you are using a standard antenna/CableTV hookup (as
shown on page eight), select the channel of the TV pro­
gram you want to record.
• If you are recording from other equipment, select L1 or
L2.To determine L1 or L2, refer to the Helpful Hints on
page 38.
• If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the
channel you want to record. Leave the Cable
Box/Satellite Receiver on for the timer recording.
Details are on page nine.
ONETIME PROGRAM
PROGRAM NUMBER 1
DATE
0 5 /04 TUE
STARTTIME 0 7:3 0 PM
END TIME.\0!&;,3 0 P M
CHANNEL ",S,16.,7r
REG SPEED
Instructions continue on page 38.
О О О
REPEAT REPEAT AUDIO
О © О
SUBTITLE ZOOM ANGLE SKIP/CH
О О О ® "
RETURN TITLE CLEAR/RESET SLOW
О О О О
^VCR^ ^CR/T^ ^DVD^
0
—(Z)"
STOP PLAY r«u£u
® CD ®
TIMER SET MARKER RECORD o o ®
SPEED
O O © ®
0 0 © 0
0 0 0 0
PHILIPS
Helpful Hints
If you are recording from other
equipment, set CHANNEL to LI or
L2 at step 8. If you connected the
other equipment to the AUDIO and
VIDEO In jacks on the front of the
DVDIVCR, choose L2. If you con­
nected the equipment to the AUDIO
IN and VIDEO IN jacks on the back
of the DVDIVCR, choose LI.
Enter the information while the
space is flashing.
To stop a started timer recording,
press STOP/EJECT (VCR) on
the front of the DVDIVCR. (You
cannot stop a started timer record­
ing with the STOP ■ button on the
remote.)
More Helpful Hints are on
page 76.