38 timer recording (cont*d), О о о, О о q о – Philips DVP620VR/17 User Manual
Page 38: Cancelling timer recordings, Press clear/reset to remove the menu, О о о о, О © о 0, Helpful hints
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H9620UD_1_47,qx4 04.4.7
11:57 AM Page 3E
38 Timer Recording (cont*d)
Press ▲ or ▼ to select a recording tape speed. The
arrow will appear beside your choice.The selected speed
will flash beside REC SPEED. Details about tape speed are on
page 72.
ONETIME PROGRAM
PROGRAM NUMBER 1
DATE
0 5 / 0 4 TUE
STARTTIME 0 7:3 0 PM
END TIME 0 8:3 0 PM
CHANNEL
.
REC SPEED 'i-,S
SP
SLP
Press CLEAR/RESET to store the timer recording.
Press TIMER SET. The DVD/VCR will turn off and □
will appear in the display panel. In some cases, the
DVD/VCR will switch to DVD mode instead. You may use
the DVD Player during a timer recording.
If you want to use the VCR until time for the recording,
don’t press TIMER SET until a few minutes before the
recording should start. Or, press TIMER SET only when
you know you won’t be using the VCR anymore (until
after the recording). When □ appears, you cannot put
the DVD/VCR in VCR mode by pressing VCR or
SOURCE.You must first press TIMER SET to cancel the
timer recording temporarily.Then, you can use the VCR
features again.
SEARCH MODE DISPLAY AY
О О О
REPEAT REPEAT AUDD
О © О 0*
SUBTITLE ZOOM ANGLE SKIP/CH
О О О ©"
RETURN TITLE CLEAR/RESET SLOW
О О Q О
^VCR^ ^CR/T^ ^DVD^
о I \yr
Г LM I
г ML* ОС
® ® ®
TIMER SET MARKER RECORD
DO®
_____ .-D
О О © ©
© © © ©
® © ® ©
9
Cancelling Timer Recordings
^ Press VCR, then press DISC/VCR/MENU so MENU
J appears.
^ Press or ▼ to select TIMER PROGRAMMING,
then press ►.
Press A. or ▼ to find the program you want to
% cancel.
^ While the program number is flashing, press
M
to
clear all the information for that program.
ONETIME PROGRAM
PROGRAM NUMBER >
..1ôT
DATE
05/04 " ТЬ
е
START TIME
07:30
PM
END TIME
08:30
PM
CHANNEL
16
REC SPEED
SP
Press CLEAR/RESET to remove the menu.
Helpful Hints
To change incorrect information,
press or ^ to choose the item
you want to change. Press or
▼" to adjust the information.
If a timer recording is set and H
appears, pressing STOP/EJECT
(VCR) will turn on the
DVD/VCR and/or cancel the timer
recording.The will disappear.
Press STOP/EJECTM^ (VCR)
again to remove the tape. Insert a
tape and press TI/V\ER SET to
reset the timer recording.
If there is no tape in the VCR
when you press TI/VIER SET, H
will flash. Insert a tape.