Not allowed message – Cisco VPN 3002 User Manual
Page 268
A-8
VPN 3002 Hardware Client Reference
OL-1893-01
Appendix A Troubleshooting and System Errors
VPN 3002 Hardware Client Manager Errors
Not Allowed Message
The Manager displays a screen with the message: “Not Allowed / You do not have sufficient
authorization to access the specified page.” (see
Figure A-3
Not Allowed Screen
Table A-6
Not Allowed Message Displays
Problem
Possible cause
Solution
You tried to access an
area of the Manager that
you do not have
authorization to access.
•
You logged in using
an administrator
login name that has
limited privileges.
•
You logged in from
a workstation that
has limited access
privileges.
•
Log in using the system administrator login
name and password. (Defaults are admin /
admin.)
•
Log in from a workstation with greater access
privileges.
•
Have the system administrator change your
privileges on the Administration |
Access Rights | Administrators screen.
•
Have the system administrator change the
privileges of your workstation on the
Administration | Access Rights | Access
Control List screen.