8 confirming the print status of the printer, 8 confirming the print status of the printer -40, P.1-40 – Canon W7250 User Manual
Page 52: Press or to select “test print” then press
Setting Up the Printer
40
1-40
Note
8 Confirming the Print Status of the Printer
After the printer and computer have been prepared, print a Nozzle Check
pattern to confirm that ink is supplied correctly from each nozzle. Before
printing, make sure A3 or larger roll media is set.
z If you are using a cut sheet, make sure at least one sheet of unused A3 paper (not
the blank side of used paper) or larger is set.
1
If the printer is off, press the Power button to switch the printer on.
After a few seconds “Online” is displayed in the operation panel and the
Online lamp lights.
2
Press the Online button twice to display “MAIN MENU”.
3
Press or to select “Test Print” then press .
Enter
Cancel
Cut Sheet
Roll Media
Paper Source
Data
Message
Power
Online
Enter
Cancel
Cut Sheet
Roll Media
Paper Source
Data
Message
Power
Online
M A I N M E N U
T e s t P r i n t