Canon W7250 - Manual (Page 75)

Installing a Windows TCP/IP Network Connection
5
3-5
Connecting the LAN Cable
The printer is equipped with a LAN port that is compatible with 10BASE-T/
100BASE-TX. To connect this printer to a network, make the connection
between the printer LAN port and a network HUB.
1
Connect the LAN cable to the LAN port.
Thread the cable through the cable guide on the back of the printer.
2
Thread the cable through the cable guide on the back of the printer.
3
Connect the other end of the LAN cable to the Port of the HUB.
Push in the connector until you hear it catch.