Camera modes, Video mode, Camera modes / video mode – GoPro HERO User Manual
Page 11
20
21
The HERO features several camera modes. To display the modes,
press the
Power/Mode button repeatedly.
These modes appear:
Video (default) Record video
Photo
Capture a single photo
Burst
Capture 10 photos in 2 seconds
Time Lapse
Capture a photo every 0.5 seconds
Settings
Adjust camera settings
/ Camera Modes
/ Video Mode
CAPTURING VIDEO
To capture video, verify that the camera is in
Video mode. If the Video
icon [
] does not appear in the upper left on your camera status
screen, press the
Power/Mode button repeatedly until it appears.
To Start Recording:
Press the
Shutter/Select button. The camera emits one beep and the
camera status lights flash while recording.
To Stop Recording:
Press the
Shutter/Select button. The camera status lights flash three
times and the camera emits three beeps to indicate recording has
stopped.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers off.
PRO TIP: With QuikCapture, you can quickly turn your camera on
and immediately begin capturing video just by pressing the
Shutter/
Select button. To turn off QuikCapture, see