Compaq R6000 - Manual (Page 61)

4-6 Compaq R6000 Series UPS Operation and Reference Guide
ON: 1 - - 4 5
UPS Status + Active Alarm Count
In this example, the UPS has detected no problems and there are no alarms.
System Normal
0 Alarms
On Battery
The UPS has switched from utility voltage input to battery power. “X” is the
number of alarms.
On Battery
X Alarms
On Bypass
The UPS has been placed in Bypass mode. “X” is the number of alarms
triggered when the UPS was switched to Bypass mode.
On Bypass
X Alarms
Load Power Off
The power feeding the UPS-protected devices has terminated. “X” is the
number of alarms triggered when the load power was terminated.
Load Power Off
X Alarms
Load Power On
Utility power has been restored to the devices backed up by the UPS. “X” is
the number of alarms triggered when the load power resumed.
Load Power On