Compaq R6000 - Manual (Page 62)

Configuration 4-7
X Alarms
Overload
There are so many loads attached that the UPS cannot protect them properly
anymore. “X” is the number of alarms triggered when the overload occurred.
Overload
X Alarms
Meters
Main Menu
→ Meters
The next choice available on the Main Menu, is “Meters.” This SubMenu
provides virtual meters monitoring the UPS voltages. Scroll up and down
through this menu using the Center button. If the words continue off the
screen, scroll right and left to read the message.
Input Volts
The utility voltage
Input Volts
220
Output Volts
The voltage available at the UPS output receptacles
Output Volts
208
Input Frequency
The utility voltage frequency in Hertz
Input Frequency