Canon CEL-SE65A210 - Manual (Page 29)

26
Setting the Date/Time
The set Date/Time menu will appear the first time the camera power
is turned on or whenever the lithium date battery charge is low. Start
from Step 5 to set the date and time.
1
Turn on the camera (p. 29).
2
Press the MENU button.
z The [ (Rec.)] or [ (Play)] menu
appears.
3
Press the X arrow on the omni
selector to select the [ (Set up)]
menu.
z Pressing the JUMP button or turning the
zoom lever also switches between
menus.
4
Press the S or T arrow on the
omni selector to select [Date/
Time] then press the SET button.
z The factory default for the date format
may differ from that shown here in some
regions.
5
Set the date and time.
z Press the W or X arrow on the omni
selector to select a field to change.
z Press the S or T arrow on the omni
selector to set the values.
z The date can be set up to the year 2030.
6
Press the SET button.
z After adjusting the settings, press the MENU button to close the
menu window.
(Rec.) Menu in
Auto mode
EC140CUG_Eng.book Page 26 Thursday, July 29, 2004 3:16 PM