Selecting an af frame – Canon CEL-SE65A210 User Manual
Page 92
89
Sh
oo
ting
– Sel
e
ct
in
g Pa
rt
icu
la
r Ef
fec
ts
Selecting an AF Frame
The AF frame indicates the area of the composition on which the
camera focuses. You can set the AF frame in the following way.
z
Selecting AiAF (auto selection) or a center-point AF frame (see
below).
z
Selecting a desired position for the AF frame (p. 90).
You can set the AF mode selection to Auto Selection (AiAF) or to
center-point. When Auto Selection (AiAF) is selected, the camera
automatically selects an AF frame from 9 points to focus according
to the shooting conditions. With the digital zoom, the center-point
AF-frame is always selected.
Mode Dial
1
Press the
button.
z
The AF mode selection will appear in the Display Panel. If the LCD
Monitor is on, the AF frame will be displayed in green.
2
Select the auto selection or center-point AF frame
using the main dial.
z
You can select either AiAF (auto selection) or center-point AF
using WX when the camera is in
,
,
, or
modes.
3
Press the
button.
z
You can immediately shoot the image using the selected AF frame
by pressing the shutter button instead of pressing the
button.
e.g. Auto Selection
e.g. Center-point
EC140CUG_Eng.book Page 89 Thursday, July 29, 2004 3:16 PM