Canon CEL-SE65A210 User Manual
Page 34
31
P
re
pa
ring
th
e Came
ra
, B
asi
c F
unc
tio
ns
Turning the Power Off
Power Saving Function
This camera is equipped with a power saving function. When this
function is turned on and it activates, restore power by turning the
mode lever toward
or
.
1
Press the
button.
z
The power goes off.
Shooting Mode: Powers down approximately 3 minutes after the
last control is accessed on the camera.
The LCD monitor also shuts off approximately 1 minute
*
after the
last control is accessed on the camera. Press any button except the
mode lever to turn the LCD monitor back on.
* This time can be changed (p. 52).
Playback Mode: Powers down approximately 5 minutes after the
last control is accessed on the camera.
Printer Connection Mode: Powers down approximately 5 minutes
after the last control is accessed on the camera.
z
Please note that the camera continues to consume a minimal
amount of power even when the power saving function shuts
it down.
z
The power saving function is disabled while a slide show plays on
the camera or during a computer connection (p. 135, 151).
z
You can turn off the power saving function in the Set up
menu (p. 52).
EC140CUG_Eng.book Page 31 Thursday, July 29, 2004 3:16 PM