Canon CEL-SE65A210 User Manual
Page 74
71
Sh
oo
ting
– Le
tting
the
Came
ra
S
el
ec
t Se
tting
s
3
Shoot the first image.
z
The exposure and white balance settings are set and locked with
the first image.
4
Compose and shoot the second image so that it
overlaps the first.
z
Minor discrepancies in the overlap can be corrected with the
software.
z
An image can be retaken. Press the S, T, W or X arrow on the
omni selector to return to that frame.
5
Use the same procedures to shoot the remaining
frames.
z
A maximum of 26 images can be recorded either horizontally or
vertically.
6
Press the SET button after the last shot.
z
See page 206 for settings that can be changed in this mode.
z
A custom white balance setting (p. 96) cannot be set in
mode. To use a custom white balance setting, first set it in
another shooting mode.
z
The settings in place for the first image are locked in and cannot
be changed for subsequent shots.
z
A TV cannot be used as the monitor for shooting in this mode.
Sequence
Sequence
EC140CUG_Eng.book Page 71 Thursday, July 29, 2004 3:16 PM