Resetting the settings to default – Canon CEL-SE65A210 User Manual
Page 57
54
Resetting the Settings to Default
You can reset the menu and button operation settings to default.
1
Turn on the camera.
z
You can turn on the camera in either Shooting or Playback mode.
2
Press the MENU button for longer
than 5 seconds.
z
The message “Reset settings to default?”
appears on the LCD monitor.
3
Select [OK] using the W or X
arrow on the omni selector, then
press the SET button.
z
The screen on the right appears while
resetting. The normal screen resumes
when resetting is complete.
z
To cancel resetting, select [Cancel]
instead of [OK].
z
The following settings cannot be reset to default:
• The [Date/Time], [Language] and [Video System] options in the
menu (p. 52)
• White balance data set with the custom white balance function
(p. 96)
• Newly registered My Camera settings (p. 163)
z
When the camera is in Shooting mode and the mode dial is set to
C
1
/C
2
, only the C
1
/C
2
mode settings will revert to default. In
other cases, the C
1
/C
2
settings will not revert to default.
EC140CUG_Eng.book Page 54 Thursday, July 29, 2004 3:16 PM