Philips 30PF9946-37 - Manual (Page 12)

Dynamic contrast
Automatically makes the contrast in the darker and
the brighter picture areas more noticeable as the
image on the screen changes.
Normally, select Medium, it may be preferred to
select Minimum, Maximum or Off.
0 Press the cursor right to enter the list.
0 Select one of the settings with the cursor
up/down.
0 Press the cursor left to return to the picture
menu.
DNR (Digital Noise Reduction)
Automatically filters out and reduces the image
noise and improves picture quality when receiving
weak video signals.
0 Press the cursor right to enter the list.
0 Select Off, Minimum, Medium or Maximum
according to the image noise.
0 Press the cursor left to return to the picture
menu.
Color enhancement
When activated, this feature automatically controls
green enhancement and blue stretch. It makes the
colors more vivid,
o Press the cursor right.
0 Select On or Off in order to activate/de-
activate Color enhancement with the cursor
right.
Tint
Allows you to select the color mix (hue) of the
picture.
Picture format
This menu item performs the same as the
button on the Remote Control. See Use of the
Remote Control, p. 4.
Active Control
The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
0 Press the © button on the remote control.
0 The Active Control menu appears.
0 Press the cursor up/down to select the Active
Control values Off, Minimum, Medium
(recommended) or Maximum.
The picture settings are being optimized
continuously and automatically which is
displayed by bars.The menu items can not be
selected.
0 Press the cursor right to select Auto Picture.
0 Press the cursor up/down to select one of the
predefined picture settings.
0 Press the cursor right to select Active
Display.
0 Press the cursor up/down to select Show bars,
one of the Dual screen demos or Off.
When you select Dynamic contrast. Pixel Plus,
Digital Noise Reduction or Digital Natural
Motion, the TV screen is divided into two parts:
in the left part the selected picture quality
setting is switched off; in the right part it is
switched on.
Note: Dependent on the input signal, one or more
Dual screen demos may not be selectable.
O Press the © button again to switch off the
Active Control menu.
Note: Active Control is not available for digital signals via
AV4 or DVI.