Philips 30PF9946-37 - Manual (Page 19)

DVD Player or other accessory digital source devices
AV4
■0
001 ;
0!0?
AUDIO ____ , O O O ' O O
DVD
Devices with AV connectors only
0 Connect the video cables to the device's AV OUT jacks
and to the TV's AVI, AV2 or AV3 IN Jacks.
0 Connect the audio cables to the device's AUDIO L and
R jacks and to the L AUDIO and R AUDIO AVI, AV2 or
AV3 jacks on the TV. (According to where you
connected the video cables, to AVI, AV2 or AV3.)
Devices with an S-Video connector
0 Connect an S-Video cable to the AV2 S-VIDEO input.
Note: When using the S-VIDEO connector do not connect
any device to the AV2 VIDEO input
o Connect the audio cables to the device's AUDIO L and
R jacks and to the L AUDIO and R AUDIO AV2 jacks on
the TV.
Devices with Component Video Output Connectors
(DVD, Set Top Box,...)
0 Connect the cables of your YPbPr equipment Q) to
the YPbPr input AV4 IN sockets on the TV.
e
Connect the Audio left and right (only for stereo
devices) cables (2) to the AUDIO L and R input of
AV4.
Devices with Progressive scan output (e.a. a digital Set Top box, a video game console or a
Progressive scan DVD player (480p or 1080i)
Connect the device with 2Fh YPbPr output to the YPbPr jacks and to the L and R AUDIO jacks of
AV4.
Note's
- The labels for the component video sockets may differ depending on the DVD player. Although the
abbreviations may vary, the letters 6 and R stand for the blue and red component signals, respectively, and Y
indicates the luminance signal. Refer to the DVD player’s instructions for use for definitions and connection
details.
- This television is designed to accept high definition signal standards 1080i and 480p as specified by the
Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which may
cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colors or no colour, no picture, or even combinations of
these on your screen, check if the connections are done in the correct way or move your digital device further
away from your TV.
16