Philips 30PF9946-37 - Manual (Page 5)

Q Preparation ^
Do not insert the power plug in a wall socket
before all connections are made.
O Wall mounting instructions
For the wall mounting instructions follow the
illustrated steps printed on the separate
template. Make sure that the wall mount is
being fixed securely enough so that it meets
safety standards.The weight of the TV (excl.
packaging) is about 38 Lbs. How to mount the
supplied stand, see the separate leaflet.
Note: other (not supplied) stands are optional
accessories. Consult your dealer.
0 Place or hang the TV wherever you want, but
make sure that air can circulate freely through
the ventilation slots. Do not install the TV in a
confined space such as a book case or a
simular unit.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity. Avoid heat,
direct sunlight and exposure to rain or water.
The equipment shall not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on it.
Insert the aerial plug firmly into the aerial
socket “ir at the bottom of the TV. For best
picture quality use the suppressor-aerial cable
supplied.
To connect your computer, see p. 17.
To connect other accessory devices, see p. 14.
In order to obtain the best result, please use
only the supplied antenna cables between the
TV and videorecorder, and between
videorecorder and antenna connector.
Insert the power plug supplied into the mains
at the bottom of the TV and in the wall socket.
Refer to the rear of the TV set for the correct
operation voltage. Consult your local dealer if
your AC power supply is different.To prevent
damaging the power (AC) cord which could
cause a fire or electric shock, do not place the
TV on the cord.
Remote control: Insert the 2 batteries
supplied (Type R6-1,5V).
The batteries supplied
do not contain the heavy
metals mercury and
cadmium. Please check
on how to dispose of
exhausted batteries
according to local
regulations.
Turn the TV on : Press the power button (J)
at the right side of the TV.
A green LED and the screen light on.
The green LED blinks every time you press a
button on the remote control. When you turn on
your set for the first time, the menu language
automatically appears on the screen. Alternately the
explanation appears in different languages.
^ Buttons on top of the TV ^
^ 4- HENU/OK
Picture Sound
—o-------- o----
Features
—O
Should your remote be lost or broken you can still change
some of the basic settings with the buttons on top of your
TV.
Press:
• the ^ - or + button to adjust the volume;
• the -P/CH+ buttons to select the TV channels or sources.
The MENU/OK button can be used to summon the main
menu without the remote control.
Use:
• the ^ - and + buttons and the P/CH- and P/CH+ buttons
to select menu items in the directions as shown;
• the MENU/OK button to confirm your selection.
Note:
When activated via the MENU/OK button on top of the TV, only
Exit lets you dismiss the menu.
Navigate to Exit and press the MENU/OK button.