Cisco 2975 User Manual

Page 14

Advertising
background image

1-6

Catalyst 2975 Switch Hardware Installation Guide

OL-17784-01

Chapter 1 Product Overview

Front Panel

If your switches are stacked and you press the Mode button on any switch in the stack, all the switches
change to display the same selected mode. For example, if you press the mode button on the stack master
to display SPEED, all the other stack members display SPEED.

Even if PoE mode is not selected, this LED still shows PoE problems if they are detected.

Stack LED

The stack LED shows the sequence of member switches in a stack. Up to nine switches can be members
of a stack. The first nine port LEDs show the member number of a switch in a stack.

Figure 1-3

shows

the LEDs on the first switch, which is stack member number 1. For example, if you press the Mode
button and select Stack, the LED for port 1 blinks green. The LEDs for port 2 and 3 are solid green, as
these represent the member numbers of other stack members. The other port LEDs are off because there
are no more members in the stack.

STAT

(port status)

Off

No link, or port was administratively shut down.

Green

Link present.

Blinking green

Activity. Port is sending or receiving data.

Alternating
green-amber

Link fault. Error frames can affect connectivity, and errors such as
excessive collisions, cyclic redundancy check (CRC) errors, and
alignment and jabber errors are monitored for a link-fault
indication.

Amber

Port is blocked by Spanning Tree Protocol (STP) and is not
forwarding data.

After a port is reconfigured, the port LED can remain amber for up
to 30 seconds as STP checks the switch for possible loops.

Blinking amber Port is blocked by STP and is sending and receiving packets.

DUPLX

(duplex)

Off

Port is operating in half duplex.

Green

Port is operating in full duplex.

SPEED

Off

Port is operating at 10 Mb/s.

Green

Port is operating at 100 Mb/s.

Blinking green

Port is operating at 1000 Mb/s.

SFP module ports

Off

Port is operating at 10 Mb/s.

Green

Port is operating at 100 Mb/s.

Blinking green

Port is operating at 1000 Mb/s.

STACK

(stack member)

Off

No stack member has that member number.

Blinking green

Stack member number.

Green

Member numbers of other stack member switches.

Table 1-7

Meanings of LED Colors in Different Modes (continued)

Port Mode

Port LED Color

Meaning

Advertising