Cisco 2975 - Manual (Page 30)

2-12
Catalyst 2975 Switch Hardware Installation Guide
OL-17784-01
Chapter 2 Switch Installation
Installing the Switch
Mounting in a Rack
After the brackets are attached, use the four supplied Phillips machine screws to attach the brackets to
the rack (
Figure 2-12 ). Use the black Phillips machine screw to attach the cable guide to the left or right
bracket.
When you complete the switch installation, see the “After Switch Installation” section on page 2-16 for
more information on switch configuration.
Figure 2-12 Mounting the Switch in a Rack
1 Phillips machine screw, black 4 Number-12 Phillips machine screws
2 Cable guide 5 Mid-mounting position
3 Front-mounting position 6 Rear-mounting position
205082
Catalyst 2975G Series PoE-48
Catalyst 2975G Series PoE-48
CONSOLE
DC INPUT S FOR RE MOTE POWER S UPPLY SPECIFIE D IN MAN UAL
STACK 1
STACK 2
2 1
3
6
4
5
4