Cisco 2975 - Manual (Page 31)

2-13
Catalyst 2975 Switch Hardware Installation Guide
OL-17784-01
Chapter 2 Switch Installation
Installing the Switch
Wall-Mounting
• Attaching the Brackets for Wall-Mounting, page 2-13
• Attaching the RPS Connector Cover, page 2-14
• Mounting on a Wall, page 2-15
Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
Attaching the Brackets for Wall-Mounting
Figure 2-13 shows how to attach a 19-inch bracket to one side of the switch. Follow the same steps to
attach the second bracket to the opposite side.
Figure 2-13 Attaching the 19-inch Brackets for Wall-Mounting
1 Phillips truss-head screws
Catalyst 2975G
Series PoE-48
272684
1