Reconnect a headset or car kit, Disconnect or unpair from a bluetooth device – ZTE Speed User Manual
Page 128
Tools and Calendar
118
The pairing and connection status is displayed below the hands-free headset or car kit name. When
the Bluetooth headset or car kit is connected to your phone, the Bluetooth icon lights up in the
status bar. Depending on the type of headset or car kit you have connected, you can then start
using the headset or car kit to listen to music or make and receive phone calls.
Note: Due to different specifications and features of other Bluetooth-compatible devices, display
and operations may be different, and functions such as transfer or exchange may not be possible
with all Bluetooth-compatible devices.
Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it automatically
by turning on Bluetooth on your phone and then turning on the headset. However, sometimes you
will need to reconnect manually, for example if you have been using your headset with another
Bluetooth device.
1. From the home screen, touch
> Settings
> Bluetooth.
2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on.
3. Make sure that the headset is discoverable.
4. Touch the headset’s name in the Bluetooth menu.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
Unpair from a Bluetooth Device
, and then follow the instructions in
Disconnect or Unpair from a Bluetooth Device
You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
Disconnect a Bluetooth Device
1. From the home screen, touch
> Settings
> Bluetooth.
2. In the PAIRED DEVICES section, touch the device name to disconnect.
3. Touch OK.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To connect
to the other device again, you may need to enter or confirm a passcode again.