ZTE Speed - Manual (Page 92)

Web and Data 82
1. From the home screen, touch > Settings > Wi-Fi.
2. Touch the wireless network that the phone is currently connected to. You will see a message
box showing the Wi-Fi network name, status, speed, signal strength, and other details.
Note: If you want to remove the phone’s wireless network settings, touch Forget on this window.
You need to enter the settings again if you want to connect to this wireless network.
Connect to a Different Wi-Fi Network
Use the Wi-Fi settings to scan for and connect to a different Wi-Fi network.
1. From the home screen, touch > Settings > Wi-Fi. Detected Wi-Fi networks are
displayed. To manually scan for available Wi-Fi networks, touch > Scan.
2. Touch another Wi-Fi network to connect to it.
Note: If the wireless network you want to connect to is not in the list of detected networks, touch
at the bottom of the screen. Enter the wireless network settings and touch Save.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the access point
which supports WPS.
You can use one of the following methods to connect your phone to a wireless network using WPS.
Method one: WPS button (Recommended)
1. From the home screen, touch > Settings > Wi-Fi and touch the Wi-Fi slider to turn Wi-Fi
on.
2. Touch .
3. Press the WPS button on the access point and the access point will recognize your phone and
add it to the network.
Method two: PIN number
1. From the home screen, touch > Settings > Wi-Fi and touch the Wi-Fi slider to turn Wi-Fi
on.
2. Touch > WPS Pin Entry.
3. The WPS PIN number displays on the screen. Enter the PIN number into the access point's
setup page.
l
After entering the PIN number, your phone automatically finds the access point and
configures the connection.
Note: For detailed information about the WPS feature of the access point, please refer to its user
documents.