KERN & SOHN ABJ 320-4NM - Manual (Page 59)

ABS-N_ABJ-NM-BA-e-1312 59

Or count more pieces
or
The menu item to change the stored reference is called up, the
currently set reference quantity is displayed.
+ see „4. Change or add piece weight“
The stored piece weight is displayed in grams, marked by the
symbol . Using PRINT the reference weight (UW= Unit weight)
can be edited when a printer is connected.
e.g.: UW = 1.0001
To go back to piece counting display press UNIT anew.
Switching over between piece counting and weighing mode
4. Change or add piece weight
In piece counting mode call-up the desired memory
location
 Every time UNIT is pressed (approx. for 3 sec.), the next
memory location [ ] is called up.
Change or add piece weight
 Place an empty container on the balance and tare it by
pressing TARE.
 Press MENU twice, the currently set reference quantity
is displayed.
 Press the navigation buttons ( ) repeatedly until the
desired reference quantity is displayed (possible
reference quantities 5, 10, 20, 50, 100).
Use MENU to scroll forward.
Use UNIT to scroll backward.
 Fill number of pieces into the container according to the
selected reference quantity.
 Wait for the stability display ( ), then confirm by
pressing TARE.
The balance is now in parts counting mode and counts
all units on the weighing plate.