KERN & SOHN ABJ 320-4NM - Manual (Page 71)

ABS-N_ABJ-NM-BA-e-1312 71
3. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.
4. Start tolerance control
If necessary, place an empty container on the balance and tare it by pressing
TARE
.
Place weighed goods and wait until the indicator
,
or appears. With
the help of the indicator check if the weighed goods are under, inside or over the
default tolerance
Example of entry:
 HI.LIM 7.0000 g
 LO.LIM 6.0000 g
 UND.RNG 5.0000 g
 OVR.RNG 8.0000 g
Sample weight
<
UND.RG
(sample weight < 5 .0000g)
No indicator
is
displayed
UND.RG
≤
sample weight
<
LO.LIM
(sample weight 5.0000g - 5.9999g)
is displayed
LO.LIM
≤
sample weight
≤
HI.LM
(sample weight 6.0000g - 7.000g)
is displayed
HI.LIM
<
sample weight
≤
OVR.RNG
(sample weight 7.0001g - 8.0000g)
is displayed
Sample weight > OVR.RNG
(sample weight > 8.0000 g)
No indicator
is
displayed