KERN & SOHN ABJ 320-4NM - Manual (Page 86)

86 ABS-N_ABJ-NM-BA -e-1312
5. Stop bit settings

Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „STOP“ is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. S. 1) appears.
 Press TARE.
Selectable settings:
Display S. 1 S. 2
Stop bit 1 bit 2 bit
6. Set handshake

Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „HAND.SHK“ is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. HS.HW) appears.
 Press TARE.
Selectable settings:
Display HS.OFF HS.HW HS.SW HS.TiM
Hand-
shake
No handshake
Hardware
handshake
Software handshake Timer handshake