KERN & SOHN ABJ 320-4NM - Manual (Page 87)

ABS-N_ABJ-NM-BA-e-1312 87
7. Set data format

Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „D.FORM“ is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. DF.1) appears.
 Press TARE.
Selectable settings (details see chpt. 15.4):
Display DF.1 DF.2 DF.3 DF.4 DF.FREE
Data
format
Shimadzu
Standard
Shimadzu
Standard
Mettler
Standard
Sartorius
Standard
Options:
Head byte 1 -17,
Data length 8 -2
8. Set separator

Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „DELIM“ is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. DF.1) appears.
 Press TARE.
Selectable settings:
Display CR LF CR+LF COMMA WINI
Separator CR LF CR+LF COMMA not documented
9. Return to weighing mode
 Press ON/OFF repeatedly or for 3 s.