KERN & SOHN ABJ 320-4NM - Manual (Page 77)

ABS-N_ABJ-NM-BA-e-1312 77
Further steps depend on the desired setting:
Stability
display (
)
Function set/update cancel
yes
ON
 Press PRINT and
continue with step 3.
Press TARE and
continue with step
5.
no
off
 Press TARE and
continue with step 3.
continue with step
5.
3. Set output condition

Use the navigation buttons ( ) to select the desired
mode, e.g. Mode 3 (details see Tab. 1)
 Confirm with TARE
4. If necessary, set condition for zero display

Press PRINT
 Select the desired adjustment using the navigation keys
( )
RET.0
An other output when the display goes back to zero.
RET.50%
An other output when the display goes back to 50% of the
previous weighing value.
 Confirm with TARE
With selection „RET.0“
5. Return to weighing mode

Press ON/OFF repeatedly or for 3 s. From here on the
Auto Print function is active, the indicator is
displayed.
5. Place goods to be weighed on balance
 If necessary, place an empty container on the balance and tare it by pressing
TARE
.
 Place weighed goods and wait until the stability display ( ) appears. The
weighing value is issued automatically.
6. Remove the weighed good.
 Wait until the stability ( ) / zero display appears. The weighing value is issued
automatically.