KGUARD Security BR1621 - Manual (Page 103)

ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
103
Menu Item Description
Enable Select Enable to issue a notification when the event type occurs.
Buzzer Set the buzzer duration when the event occurs (Off/10 S/20 S/40 S/60 S).
To disable buzzer, select Off.
Show Message Check the box to display a message on the screen when the event occurs.
Send Email Check to enable email alarm notification. If the function is enabled, the system will
send the alarm to the specified email address. See
“4.4.3 Email Settings” on page
55 .
Alarm Out If an alarm device is connected, check the box to make the device sound the alarm
when the event occurs.
Dwell Time Select the alarm duration (10S/20S/40S/60S).
4
After all settings are complete, click Save.
Set Auto Maintenance
Use this feature to automatically reboot the DVR on a specified schedule. When the DVR reboots, all settings and data
are refreshed from the memory, which optimizes the DVR performance.
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Advanced > Maintain.
3
Set Auto Maintain to Enable.
4
In Reboot, select the frequency to reboot the DVR. Options are:
• Everyday: Reboots the DVR on a daily basis. If this option is selected, specify the time you want to reboot the
DVR.
• Every Week: Reboots the DVR on a weekly basis. If this option is selected, specify the day of the week and the
time to reboot the DVR.
• Every Month: Reboots the DVR on a monthly basis. If this option is selected, specify the date (1 to 31) and the
time to reboot the DVR.
Note:
The illustration above is an example of Auto Reboot set to Every Week. The available fields vary depending on the
selected Reboot option.
5
After all settings are complete, click Save.
« TIP »
To restore the maintenance schedule to default setting, click Refresh.