KGUARD Security BR1621 - Manual (Page 55)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
55
4.4.2 Remote Stream Setup
The Remote Stream page allows you to enable or disable video output of a particular channel if the channel is being
viewed via remote access.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK, select the Remote Stream tab. The remote stream framerate settings are
displayed on a table.
3
Select the channel and adjust the corresponding settings such as Video, FPS, and Quality.
4
Check the Audio box to enable audio.
5
To copy the current settings to all channels or one specific channel. Click the arrow on Copy and To to select an
option and then click Copy.
6
After all settings are complete, click Apply.
7
When data saving is complete, click OK.
4.4.3 Email Settings
The DVR supports sending of email notifications when events occur, such as when motion is detected or the HDD fails
at the specified channel, day, and time.
Note:
Be sure that the DVR network connection is properly configured before proceeding with the email setup.
To set up email, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK, select the Email tab.
3
On Email, select Enable.
4
Click Schedule to implement the email schedule. For details, refer to “Email Schedule Setup” on page 56 .
5
On SSL, select the Enable check box if your email server needs the SSL verification. Check with your email service
provider for the applicable setting.