KGUARD Security BR1621 - Manual (Page 91)

ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
91
Setting the Email
Use the Email menu to configure the sending and receiving email servers to send and receive email alarm notifications.
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Network > Email.
3
Modify the necessary settings.
Menu item Description
Email Enable/Disable email configuration.
Schedule Implement the email schedule.
SSL SSL (Secure Sockets Layer) protocol is used to secure your email account. Enable SSL if
the email server needs the SSL verification. Check with your email service provider for
the applicable setting.
SMTP Port Enter the SMTP port of the email server that you want to use to send emails.
Note:
By default, the SMTP port is 25 for email without SSL verification. For Gmail server
or for email that needs SSL verification, the SMTP port is 465, by default. Check with
your email service provider for the correct setting.
SMTP Server Enter the SMTP server of the email server that you want to use to send emails.
Sender Email Enter the email address from where you want to send the email.
Sender Pwd Enter the sender’s email password.
Receiver Email Enter the email address where you want to send the email alarm notification.
Interval Select the interval time between sending of emails (1/3/5/10 Minute).
4
After all settings are complete, click Save.
5
To test the configuration, click Email Test.
« TIP »
To cancel any modifications and retain the existing settings, click Refresh.