KGUARD Security BR1621 - Manual (Page 37)

ENGLISH
Chapter 3: Getting Started
DVR User’s Manual
37
3.6 Using PTZ Controls
If you are using a PTZ speed dome camera, you can configure the PTZ control settings.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select PTZ.
Note:
This option is not available if the PTZ camera is in Cruise mode. See “4.6.2 PTZ Setup” on page 62 .
3
The PTZ control panel appears on the screen.
Note:
To change the PTZ settings, see “4.6.2 PTZ Setup” on page 62 .
1
2
3 4 5 6
7
8
10 11 9
No. Icon Item Function
1
Channel Select Click to select the channel of the PTZ camera.
2
Pointer pan Click the direction arrow to select the direction of the PTZ camera.
Click the middle icon to switch to auto pan mode.
3
Zoom Click to zoom in/out.
Focus Click to adjust the focus.
Iris Click to adjust the iris setting.
4 - Time Set a preset time.
5
Save Click to save the settings and preset points.
6
Clear Click to delete the selected preset.
7
Set Preset Point Click to set a specific preset point on a PTZ camera.
Note:
You can set up to 255 preset bits for the DVR. However, the actual preset
quantity varies depending on the PTZ camera performance.
8
Go to Preset Point Click to go to a specific preset point.
9 - Total Display the total of preset bit.
10 - No. Set a preset point.
11 Speed Click to adjust the speed.