LABEC M-MIA-CC - Manual (Page 26)

Ultrasonic milk analyser
Operation manual 23.08.10 24/98
Follow repeatedly sucking/pouring out the cleaning solution and heating it up.
After the cleaning is finished, the cleaning solution is emitted in the reservoir
with the waste liquids.
For maximum cleaning effect it is recommended the cleaning solution to be
preliminary heated up to 40-50 degrees centigrade.
Follows rinsing with water:
4. Put a glass with water for rinsing the device.
Put filled with
Water glass
and press Enter
to Continue
After rinsing the display shows the following:
End of cleaning
After 2 seconds the following appears on the display:
Analyser ready
After this the analyser is ready for normal measurement or to be switched off
from the power supply.