Compaq AP500 - Manual (Page 58)

3-38 Removal and Replacement Procedures
4. Pull back the power supply air baffle 1.
5. Loosen the two thumbscrews 2 and slide the removable hard drive cage out 3.
3
2
1
Figure 3-36. Removing the removable hard drive cage
6. Remove the four screws that secure the hard drive to the removable hard drive cage and
pull the hard drive straight out.
Figure 3-37. Removing a hard drive
CAUTION: When servicing the workstation, make sure cables are placed in their
proper locations during the reassembly process. Improper cable placement can
damage the workstation.