Longshine LCS-844MT - Manual (Page 14)

10
Wall Mount Installation
The Device Server can also be installed by wall
mounting. The backside casing provides space for
two screws each side. Identify the exact location at
wall by placing the Device Server and marking the
screw positions. Use the screw (include in the
package) and snug them well to fix the Device Server.
Din Rail Mount Installation
The aluminum DIN Rail attachment plate should
already be affixed to the back panel of the Device
Server. If you need to attach the DIN Rail plate,
assure that the stiff metal spring is situated towards
the top. Attaching the Device Server to the DIN rail is
easy, just align, and attach the top rail, then press
down and snap forward the Device Server to snap in
the bottom rail, as shown in the figures below.
Use following steps set up the Device Server: