Longshine LCS-844MT - Manual (Page 24)

20
window will appear, assign the connection name.
Then select the correct available COM port
(COM1 or COM2). After this enter the port
settings as below.
Bits per seconds: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Once connection is established, you will see a log
in screen.
4. Press ENTER and on the following screen, type
the default username admin, leave the password
field blank since there is no default value and
press ENTER to proceed.
5. Select either CLI User Interface or Menu-driven
Interface option by using the associated number