Longshine LCS-844MT - Manual (Page 27)

23
Telnet Access
The Device Server is accessible via a Telnet. At the
command prompt type telnet 192.168.0.254 (If
connecting with default IP). You will be prompted to
Enter user name and password as mentioned and
shown in the topic Console Port Access. Use CLI or
Menu-driven interface to perform the changes.
NOTE:
The only limitation of Telnet Access is that users can not assign
new IP address to device server. Please use Console Port Access
or Web Access to assign new IP address.
Web Access
The Device Server is accessible via a web browser
once connected to the network. Type the IP address
at web browser 192.168.0.254 (if connecting with
default IP). A window will be prompted to Enter user
name and password.