Longshine LCS-WA5-45 - Manual (Page 22)

18
Beacon Interval The period of time how long a beacon is broadcasted.
Data Rate
The "Data Rate" is the data packets limitation this wireless
AP can transmit. The wireless AP will use the highest
possible selected transmission rate to transmit the data
packets.
Preamble Type
It defines the length of CRC block in the frames during the
wireless communication. "Short Preamble" is suitable for
heavy traffic wireless network. "Long Preamble" provides
much communication reliability
Broadcast SSID
If you enable "Broadcast SSID", every wireless station
located within the coverage of this wireless AP can discover
this wireless AP easily. If you are building a public wireless
network, enabling this feature is recommended. Disabling
"Broadcast SSID" can provide better security.
IAPP
To enables multiple AP to communicate and pass information
regarding the location of associated Stations.
802.11g
Protection
Some 802.11g wireless adapters support 802.11g protection,
which allows the adapters searches for 802.11g singles only.
Select the “Disabled” to disable supporting 802.11g
protection or select “enable” to support this function.
RF Output
power Select the RF (Radio Frequency) power. The RF output power
has positive correlation with signal strength.
Turbo Mode
Some of our wireless adapters supports turbo mode, which
provides a better connection quality. Select “Always” to
support turbo mode or select “off” to turn it off . Select
“Auto” turns it on or off automatically.
Click the <Apply Changes> button at the bottom of the screen to save the
above configurations. You can now configure other advance sections or start
using the AP.