Longshine LCS-WA5-45 - Manual (Page 27)

23
Access Control
To restrict the Number of Access authentication of Stations, Set up the
control list in this page.
Configuration
Wireless Access
Control Mode
Click on the drop list to choose the access control
mode. You may select “Allow listed” to allow those
allowed MAC addresses or select “Deny Listed” to ban
those MAC addresses from accessing to this device.
MAC Address &
Comment
To set up the Value of MAC Address & Comment; enter
the MAC Address and Comment of station and click
Apply Changes to save.
Current Access
Control list
To Delete the station on the list, Click the check box in
the select item and click the “Delete Selected”. If you
want to delete all stations on the list, click “Delete All”
to remove all of them.
Click <Apply Change> button to save the above configurations. You can now
configure other advance sections or start using the AP.