Connecting this ap to your network – Longshine LCS-WA5-45 User Manual
Page 9
5
Connecting This AP to Your Network.
This Chapter provides a step-by-step guide to the installation and
configuration of this wireless access point.
Connect the power adapter with the connector end to the power
connector in the rear panel of the device and the plug end to an
appropriate outlet.
Connect the LAN port with RJ-45 cable to:
1. a broad band router to allow wireless clients to connect to WAN.
2. a switch to allow wireless clients to communicate with wired LAN.
3. a computer directly to use the computer configuring this AP.
Note: You have to configure the network settings of this AP to be
communicable with your router, switch or computer first. To change the default
network settings of the AP, please refer to “LAN Interface setup”.