Longshine LCS-WA5-45 - Manual (Page 26)

22
WPA2 Mixed Encryption
Configuration
Encryption To enable WEP, WPA, WPA2 and WPA2 Mixed
encryption modes, select the option in the drop
list. If you select none, any data will be
transmitted without Encryption and any station
can access the AP.
WPA Cipher Suite Select the WPA Cipher Suite to be TKIP or AES
WPA2 Cipher Suite Select the WPA2 Cipher Suite to be TKIP or AES
WPA Authentication
Mode
Select the WPA mode as “Enterprise
(WPA-Radius)” or “Personal (Pre-Shared Key)”.
Pre-Shared key
Format
Click on the drop list to select an Pre-Shared
Key Format as Passphrase or Hex
Pre-shared Key Enter the Pre-shared Key according to the
pre-shared key format you select.
Click <Apply Change> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the AP.