Longshine LCS-WA5-45 - Manual (Page 23)

19
Security
At the page, you can set up the WEP, WPA Encryption to ensure the security of
your Wireless. You will have to do different configurations to each encryption
modes. Click on the Encryption drop list to select an encryption mode or select
“Disabled” to transmitting data without encryption.
WEP Encryption
Configuration
Encryption To enable WEP, WPA, WPA2 and WPA2 Mixed
encryption modes, select the option in the drop
list. If you select none, any data will be
transmitted without Encryption and any station
can access the AP
Key Length Select a key length as 64-bit or 128-bit.
Key Format Select a key format as Hex or ASCII
Default Tx Key Select a default key for transmitting data.
Use 802.1x
Authentication
Mark this check box. Fill in the RADIUS server IP
address, Port Number, and Password to enable
802.1x authentication.
Click <Apply Change> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the AP.