Longshine LCS-WA5-45 - Manual (Page 25)

21
WPA2 Encryption
Configuration
Encryption To enable WEP, WPA, WPA2 and WPA2 Mixed
encryption modes, select the option in the drop
list. If you select none, any data will be
transmitted without Encryption and any station
can access the AP.
WPA2 Cipher Suite Select the WPA2 Cipher Suite to be TKIP or AES
WPA Authentication
Mode Select the WPA mode as “Enterprise
(WPA-Radius)” or “Personal (Pre-Shared Key)”.
Pre-Shared key
Format Click on the drop list to select an Pre-Shared
Key Format as Passphrase or Hex
Pre-shared Key Enter the Pre-shared Key according to the
pre-shared key format you select.
Click <Apply Change> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the AP.