Longshine LCS-WR5-3214N - Manual (Page 19)

November 10, 2008 / Version: 2.0 14
Items Information
IP Address, Subnet Mask
and Default Gateway Fill in the IP address, Subnet Mask and
Default Gateway that provided by your
Internet Service Provider (ISP).
Primary and 2
nd
DNS Server To specify the Domain Name System
(DNS). The DNS server translates
domain names into IP addresses. Enter
the DNS provided by your ISP in 1
st
and
2
nd
server.
Static IP MTU To enable the Maximum Transmission
Unit of Router setup. Any packet over this
number will be chopped up into suitable
size before sending. Larger number will
enhance the transmission performance.
Enter the MTU number in the blank to set
the limitation (default 1500bytes).
Host Name Name of this device.
Ping from WAN Mark the checkbox to enable others
detecting this device from WAN, and clear
the checkbox to disable.
WAN Ethernet MAC Select to use the following MAC as the
MAC address while serving Internet:
Original MAC: the MAC of the device.
Manual Settings: the MAC of your
computer. Click on “
Clone MAC Address
from your Computer ” to clone your
computer MAC address in the blank. You
can also change the MAC address if you
need.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.