Longshine LCS-WR5-3214N - Manual (Page 33)

November 10, 2008 / Version: 2.0 28
HT (Hyper Throughput) Physical Mode
Items Information
Select the mixed or green field mode as the
operation mode.
Operating Mode
Select the 40Mhz or 20/40Mhz as the channel
bandwidth. Channel Bandwidth
Select 400ns or 800ns as the interval time. Guard Interval
Mark to enable Hyper Throughput TX Aggregate
MAC Service Data Unit, and clear to disable. Aggregation MSDU
Select to block ACK (Acknowledge Number) or
not during data transferring. Auto Block ACK
Select to reject peer BA-Request or not Decline BA Request
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Security Settings
The Security function protects your wireless network from invasion. We provide WEP
and WPA encryption to secure your wireless network. As default, the authentication is
configured as safe mode. Please select None/WEP/WPA (Personal) in the drop list. If
you select none, any data will be transmitted without encryption and any station can
access the router.
Items Information
Please choose a SSID you have set for this
router in the
Wireless Settings > Basic Settings
from the drop-down list. The SSID will be shown
on the wireless network for recognizing.
SSID choice
Security Mode There are 6 modes for you to select: Open,
Shared, WEP Auto, WPA-PSK, WPA2-PSK, and
WPA-PSKWPA2-PSK. Please refer to the
following description.