Longshine LCS-WR5-3214N - Manual (Page 46)

Layer7 Filter
The layer7 filtering restricts certain type of data packets from your LAN to Internet
through the router. You can setup the filter against the IP address to block specific
internal users from accessing protocols that you have designated. After marking or
clearing the enable checkbox, it takes 5 seconds for this device to refresh the page.
Layer7 Filter Settings
Items Information
Mark to enable the configuration, and clear to
disable.
Enable This Rule
Fill in the IP address that you wish to filter. IP Address
Select a layer 7 protocol for your demand. Layer7 Protocol
After configure the above settings, click Add to add
a new list in the following IP Filter Rule List. The
Change button can be used to change the
configuration. Action
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Layer7 Filter Rule List
Lists the Layer7 Filter Settings you have added before. Click on the list to change
configuration, or the button to delete the list.
November 10, 2008 / Version: 2.0 41