Longshine LCS-WR5-3214N - Manual (Page 44)

IP / Port Filter Settings
Items Information
Select to enable or disable the IP/Port filter
function.
Enable This Rule
Fill in the source IP address and port range that
you wish to filter. Source IP Address /
Port Range
Fill in the destination IP address and port range
that you wish to filter. Destination IP
Address / Port Range
Select the protocol type of TCP, UDP or Both. Protocol
Input any text to describe this mapping, up to 16
alphanumerical characters. Comment
After configure the above settings, click Apply to
add a new list in the following IP / Port Filter
Rule List; or click Reset to reset all the setting. Apply / Reset Button
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
IP / Port Filter Rule List
Lists the IP / Port Filter Settings you have added before. Click on the list to change
configuration, or the button to delete the list.
November 10, 2008 / Version: 2.0 39