Longshine LCS-WR5-3214N - Manual (Page 20)

DHCP (Auto Config)
Items Information
To enable the Maximum Transmission Unit of
Router setup. Any packet over this number will be
chopped up into suitable size before sending.
Larger number will enhance the transmission
performance.
DHCP MTU
Enter your MTU number in the text-box to set the
limitation (default 1500bytes).
Host Name The name of this device. The default name is
“Wireless_11n_Router.”
Mark the checkbox to enable others detecting this
device from WAN, and clear the checkbox to
disable.
Ping from WAN
Select to use the following MAC as the MAC
address while serving Internet: WAN Ethernet
MAC
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click
on “
Clone MAC Address from your Computer ” to
clone your computer MAC address in the blank. You
can also change the MAC address if you need.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
November 10, 2008 / Version: 2.0 15